WAVE500 Dual Channel Wireless Microphone
- 2x Transmitter 1x Receiver Kit
- 2.4G wireless, 150m receiving
- Zero latency and full synchronization
- Compact size, built-in Mic or Lav beltpack
- Pocket clip and Coldshoe mounting
- 3.5mm Mic input and audio output
- 180Hz low cut and Gain control
- SPL 110dB, more space for post production
- LCD display for both Tx and Rx
- 8 hours run time built-in battery
- 1.5 hours quick charging via USB-C
WAVE500 is a compact size 2.4G wireless microphone with dual channel Transmitters and 1 stereo Receiver, to simultaneously record two sound sources in livestreaming.
The Receiver could be mounted to cameras by code shoe, output 3.5mm stereo audio of crystal clear broadcast quality to the camera to record with video. The wireless transmits up to 150 m range, zero latency and full synchronization.
You can also connect the Receiver 3.5mm audio output to smart phones to make livestreaming. Please use IMF certificated 3.5mm to lightning adaptor, and use 4-section 3.5mm jack to the adaptor, and 3-section 3.5mm jack to the Receiver.
The Transmitter has a built-in Mic on the top side, and could connect external Mic input. Support one-key mute and one-key low cut function, to filter out ＜180Hz background noise, like air conditioner or computer fans.
The Receiver has a 3.5mm audio output socket and a 3.5mm headphone monitoring socket on the top side; supports audio Gain adjustment for each channel, and Mono / Stereo switching.
The Transmitter screen displays channel (A or B), audio meter, mute status, low cut status, and battery status. The Receiver screen displays audio meters and gain value for both 2 transmitter channels, stereo or mono modes, and battery status.
Both the WAVE500 Tx and Rx have internal battery, could ensure 8 hours continued working. The package provides a 3-in-1 USB-C charging cable to charge 2x Tx and 1x Rx simultaneously. It takes 1 hours to charge to 80%, and 1.5 hours to fully charged.
See also the downloadable pdf under the product media tab below.
