Filament Mate
- Temperature display
- Greatly reducing the speed of water absorption of the filament
- Preventing dust from contaminating the filament
- Transparent observation window
Filament Mate has a built-in highprecision digital thermohygrometer and Physical desiccant to keep the humidity inside the box below 15%, which can effectively prevent the 3D printing filaments from absorbing moisture during printing and storage.
It is suitable for all 3D printing flaments, especially such as Nylon,PVA,PVB,PEEK,etc. which are diffcult to store fora long time due to high moisture absorption.
Filament Mate is compatible enough to store 1kg net weight of filaments spool and is compatible with 1.75mm,2.85mm and 3.0mm filaments as well.
Packing list
1 x Box
1 x Cover
6 x Desiccant barn doors
1 x Thermohygrometer
1 x Filament catheter 4mm
1 x Filament catheter 6mm
1 x Rubber stopper
1 x LR44 battery
6 x Bentonite desiccant
Specifications
Dry barns: Six separate dry barns and barn doors
Support flament spools: The diameter of 200mm and the thickness of 70mm
Desiccant type: bentonite clay
Humidity range: 10~99%
Accuracy: ±5%
Resolution: 1%
Response: 10sec
Temperature range: -50~70°C
Accuracy: ±1°C
Battery specifications: A number LR44
Support Teflon tube: Outer diameter for 4mm or 6mm Teflon tube
(Single or simultaneous)
Product size: 220mm*220mm*81mm
Product net weight: 560g(without desiccants and flaments)
