SMALLHD HDR 13" Production Monitor 

• Clarity that produces certainty
• Calibrated for collaboration
• Proper power option
• Smooth is fast

Clarity that produces certainty.
The display size, resolution, and pixel density of the 1303 production monitor make it an invaluable tool for precision focus pulling. When you don't have the time or proper measurements, a razor-sharp, low latency display will help you hit your marks.

Calibrated for collaboration.
Preview what you're sending downstream using the Output Preview Page, while utilizing software features like customizable focus assist and peaking on your 1303 monitor. If it's the only monitor near by, its color accuracy (100% REC 709) and broad viewing angle make it easy to share with clients and directors.

Can you see me now? Good.
With a panel roughly 3x brighter than most production monitors, the 1303 is not restrained by ambient light. Its optically bonded LCD combats glare and sunlight, allowing you to pull focus in less than ideal shooting environments.

Proper power options.
Power options for the 1303 monitor are simple and convenient. The 2-pin LEMO out allows for a seamless integration with accessories such as the Teradek Bolt wireless receiver.

Travel made easy: carry-on accessories.
All SmallHD® production monitors are equipped with the Rapid Rail Mounting System; the simplest way to connect, store, and travel with critical monitor accessories.

Smooth is fast.
Transitioning from table to C-Stand happens safely and securely with the 1303's VESA compatible mounting accessory.

Boldly go.
The 1303 monitor is the perfect blend of functionality and portability. With a razor-sharp display and a rugged build quality, the 1303 will boldly go where no other production monitor has ever gone before.

Specifications

Display
Panel Type: IPS
Size Diagonal: 13
Resolution: 1920x1080
Pixel Density (PPI): 170 PPI
Aspect Ratio: 16:9
Active Area: 15(W) x 8.42(H)
Brightness: 1500 nits
Contrast: 1140:1
Color Gamut: 100% Rec.709
Color Depth: 10­ bit
Viewing Angle: 178 Deg.
Backlight Type: LED
Adjustable Backlight: Yes
Temperature Adaptive Color: No
Input Signal Types/Formats
3G-SDI: YCC 4:2:2 @ 10 bits: 1080p60, 1080p59.94, 1080p50, 1080i120, 1080i119.88, 1080i100
HD-SDI: YCC 4:2:2 @ 10 bits: 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98, 1080psF30, 1080psF29.97, 1080psF25, 1080psF24, 1080psF23.98, 1080i60, 1080i59.94, 1080i50, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98
SD-SDI: Not Supported
HDMI : Supports YCC 4:2:2 @ 8 bits, 8/10/12 bit color in RGB & YCC 4:4:4: 1080p60, 1080p59.94, 1080p50, 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98,1080i120, 1080i119.88, 1080i100, 1080i60, 1080i59.94, 1080i50, 720p120, 720p119.88, 720p100, 720p60, 720p59.94 , 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98, 480p120, 480p119.88, 480p100, 480p60, 480p59.94, 576p100, 576p50
Component: Not Supported
Composite: Not Supported
Audio: HDMI & SDI ­ Monitor through Speakers in Front Bezel or through Headphone Jack ­ Metering up to 8 channels
Output Signal Types/Formats
3G-SDI: YCC 4:2:2 1080p60, 1080p59.94, 1080p50, 1080i120, 1080i119.88,
HD-SDI: YCC 4:2:2 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98, 1080psf30, 1080psf29.97, 1080psf25, 1080psf24, 1080psf23.98, 1080i60, 1080i59.94, 1080i50, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98 all at 8 bits
SD-SDI: Not Supported
HDMI: Supports YCC 4:2:2@ 8 bits, RGB & YCC 4:4:4 @ 8 bits: 1080p60, 1080p59.94, 1080p50, 1080p30, 1080p29.97 1080p25, 1080p24, 1080p23.98,1080i120, 1080i119.88, 1080i100, 1080i60, 1080i59.94, 1080i50, 720p120, 720p119.88, 720p100, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98, 480p120, 480p119.88, 480p100, 480p60, 480p59.94, 576p100, 576p50, 480i120, 480i119.88, 480i60, 480i59.94, 576i100, 576i50
Component: Not Supported
Composite: Not Supported
Audio: No Audio output (for initial firmware release) ­ to be supported at a later release
Connector Type
SDI: 2x 3G Inputs, 2x 3G Outputs
HDMI: 1x Input, 1x Output
Component: Not Supported
Composite: Not Supported
Audio: 1x Headphone Jack on Front of Monitor
Power In: 1x XLR 4­pin Input 12­-34VDC, 1x Lemo Output 12VDC @ 4A Max
Power Out: 1x XLR 4­pin Input 12­-34VDC, 1x Lemo Output 12VDC @ 4A Max
USB: 1x Front USB2, 2x Rear USB2
Controls
Primary Control Interface :  Joystick Navigation, Dedicated Back Button. Additional Dedicated buttons for: Image Capture; LUT Selection; Backlight Level; Input Selection; Scopes Toggle.
Record/Capture :   Dedicated Image Capture Button on Front Bezel
Data I/O
Storage :   SD Card for LUTs, Captured Images, Image Overlays, Profile Saving & Loading, Firmware Upgrades
USB:    1 Front & 2 Rear USB Ports for power (1.5A shared total), LUT Loading, Profile Saving & Loading
Power
Connector Type:    1x XLR 4-pin 12 - 34VDC IN; 12V Lemo 2-pin OUT 4A Max
Voltage:    12 - 34VDC
Power Consumption:    25 - 39W
Recommended Power Supply:    AC - DC Power Converter “Brick” Included with Monitor 110 - 240VAC 50 - 60 HZ INPUT; 15V - 6A OUTPUT
Battery Types:    Gold Mount / V­Mount via 4­pin XLR Connector
Output Voltage (VDC):    12V, 2A max via LEMO Connector
Environmental
Compliance:    FCC, IC, CE, RoHS
Operating Temperature:    0 ­- 38°
Storage Temperature:    0.5 -46°
Screen Protection:   Acrylic or Anti-Reflective Acrylic screen protetor available as an option
Height :   9" (22.86cm)
Width:    13" (33.02cm)
Depth/Length:    2.88" (7.32cm)
Weight (Item Only without battery) :  128oz (3628.74g)
Weight (Packaged) :   12lb (5.44kg)
Mount Points:   2x ¼”-20 on Top, Left & Right sides; RapidRail - Cold Shoe style rails on rear of monitor
Software
Pixel Zoom (type):    2x & 4x Zoom with smooth pan via joystick
Frame Guides:    Yes: Preset Aspect Ratios & Customizable
DSLR Scale:    Canon 5DMkii & Canon 7D
Custom Scale:    Yes: Underscan & Overscan
Anamorphic De-Squeeze:    Yes: 1.33x, 1.5x, 1.66x, 2.0x
Image Rotate(Manual/Automatic):    Yes - Automatic or Manual
Image Flip (Manual/Automatic):    Yes - Automatic or Manual
Cross Conversion:   Yes: HDMI → SDI & SDI → HDMI
Focus Assist (Colors):    Yes ­ User Adjustable Color and Intensity
Peaking:    Yes ­ User Adjustable Intensity
False Color:    Yes ­ Rainbow & Arri Style
Zebra:    Yes ­ Dual ­ User Configurable
Waveform :   Yes ­ Luma & RGB Style, Fully User Customizable w/ Region of Interest Highlighting
Vectorscope:   Yes - with Optional Skintone line
RGB Parade:    Yes ­ Fully User Customizable
Histogram:    Yes ­ Luma & RGB Style
Image Capture:    Yes ­ With Dedicated Button
Custom LUTS:    Yes ­ Loadable by Page or as Systemwide Color Calibration
LUT Downstream:   Yes ­ Available on SDI 1 or HDMI Out
LUT Import:    Via SD Card or USB storage device
Image Overlay:    Yes with Intensity Slider and Blink Setting
Firmware:    User Upgradable. Compatible with 1303-1703-2403-3203 Firmware Version 1.1 and late