Filament PVA Nature 0.5kg

• This is a material that acts as a support  and it dissolves in water. It takes about 75 minutes at 23℃

Specifications
Filament Type    PVA
Diameter    1.75mm
Printing temperature    190~220℃
Printing speed    60~90mm/s
Layer height    0.2mm
Bed temperature    Not Required
Raft    Not Required
Weight    0.5Kg
Density    1.25±0.05g/cm3
MFR(190℃，2.16Kg)     2~4g/10min
Water absorption（equilibrium in water，23℃）    ——
Tensile Strength    ≥10MPa
Flexural strength    ≥15MPa
Tensile modulus    ≥190MPa
Izod notched impact strength(IZOD,23℃)     ≥16J/m (ASTM D256)
Elongation @ Break    ≥11.0%
Heat Distortion Temperature    ≥55℃
Diameter tolerance    ±0.08mm
Roundness deviation    ≤0.08mm
Color    netural